When not using EEPROM boot and hard reset, is there any problem if /RST and /BOOT are tied directly with VDD?
/BOOT can be connected directly to VDD. I would connect /RST to VDD through a 10K pull-up resistor and also connect /RST to ground with a 0.1uF capacitor just to make sure VDD is stable before coming out of reset.
Your question has been forwarded to the part specialist and you will get an update soon.
Brian, attach files
I am not TM, but had wanted to contact you about another message I left in the Engineer Zone. I have attached the message and two schematics. I would appreciate your opinion as I had written to you originally about this project. You thought it was plausible and I have finally gotten around to almost completing it.
Retrieving data ...