Is the gain of the HMC5805ALS6 adjustable via the AGC pins?
ACG pins are short for AC ground pins. Recommended shunt capacitors should be used on those pins. They are not meant for gain control. Some more info is available on the following FAQ,
FAQ on Hittite Microwave RF/MW Amplifiers from ADI
You can get up to 2 dB gain adjustment, depending on the frequency, by changing Vgg2 value. Check the AMR table to keep the Vgg2 within AMR values.
On Dec 18, 2017 10:58 AM, "kkaya" <email@example.com>
Retrieving data ...