AnsweredAssumed Answered

Interfacing of ADF5355 Synthesizer

Question asked by Narendra_S on Dec 18, 2017

Hello guys,

We are planning to use the ADF5355 Synthesizer.
We have purchased EV-ADF5355SD1Z Evaluation board.
We have to program the Synthesizer without using SDP-S  board, using the data,clock and enable pins from our microcontroller.
Please advise us the following:
1. Can we program the evaluation board using 3 lines (clk,data,en) externally (indicate if any other lines to be used)
2. What resistors should be unmounted and where these lines should be soldered
3. Please provide an application circuit if any.

Outcomes