The ad7797 is spi? What is the baud rate?
The SPI configuration is controlled by the processor/controller that you are going to use. But the AD7797 is specified and supported up to 5MHz SCLK frequency (please refer to timing characteristics of AD7797 datasheet page 5).
Is it difficult to understand, only program in low level language? What I want is baud rate da spi?
We do not specify the SPI baud rate as this is part of the communication function which can be configured by the master which is the desired processor/controller. AD7797 is the slave which specification for SPI clock frequency max is 5MHz. So from this spec you will be able to choose what divider or function you will use to set the baud rate of your SPI. I would suggest that you can ask support on the microcontroller/processor that you are using regarding SPI configuration settings.
Retrieving data ...