Can I use ADS7-V2EBZ for AD9266-80EBZ to evaluate AD9266?
If yes, do I need to EVAL-ADC-FMC-INT to connect ?
Does VisualAnalog have linux version?
Thank you for your interest in AD9266. Unfortunately we do not have FPGA code written for ADS7-V2 to capture AD9266 outputs, so even if you can connect physically and electrically, you will not be able to capture outputs.
As far as I know, there is no Linux version of VisualAnalog. I'll ask the software group about this, but assume the answer is no unless I reply otherwise.
Hi Doulg-san, Ogura-sanOriginally it seems to be the content I asked to Sankyousya-san...If the interface is different, can you incorporate by modifying the FPGA? Already, I got "AD9680_ADS7V2.zip" from ftp://ftp.analog.com/pub/HSSP_SW/fpga/ , how can I get it loaded in vivado? I do not want to run VisualAnalog on linux. How can I read the ADC data from the USB by stocking the ADC data in the DDR memory of the ADS7-V2?I want to retrieve the data for continuously 10 seconds as it is.I will do the analysis.Please reply accordingly. < m(__)m yoroshiku..>
I will do the analysis.
I apologize for my slow reply. I have been traveling on vacation (in Japan actually!).
As Ogura-san mentioned, you would need to find a way to connect the AD9266 evaluation board to the ADS7-V2. Assuming this works, then you would need to write FPGA code to capture AD9266 outputs. AD9680 has JESD204B outputs, so the AD9680 capture code will be quite different from what is needed for AD9266.
Does this sound like the direction you would like to go? If so, I can ask one of our FPGA developers about how to load the code into Vivado. I'm sorry that I do not know about FPGA development.
Retrieving data ...