In ADPD105 Eval board the Photodetector is connected to PD1 which is slotA Channel 1 and Channel 2. But i am observing output in Chanel 3 & 4. Note: I am using Default program.
The schematic symbol had an error which showed ball F3 as PD1-2. If you check the datasheet you will see that ball F3 is PD3-4. The connection on the PCB connects the PD to ball F3 so it is correct that you are seeing data on inputs PD3 and PD4.
Thank You Mr Kevin.
Retrieving data ...