I am testing the DMA with sport transfer on SC573 ezkit using the following thread's code.
However, when I test with the I2S auto buffer mode, I always get a DMA_state.ERRC =3(
Memory Access or Fabric Error) error.
I've checked every DMA configuration procedure and the error condition in hardware reference manual
to make sure everything is alright.
But have no luck, still getting DMA hang in a error state.
Not sure the condition Fabric Error means, but I am sure the Memory Access may be fine.
Because I program the DMA start address with 0x2824xxxx.
Did I miss something?