AnsweredAssumed Answered

ADN4600 Crosspoint Switch Register Values

Question asked by jamesk on Oct 26, 2017
Latest reply on Nov 13, 2017 by jamesk


In the data sheet for this device, I see that all the registers are defined, but there is not enough description of how each bit should be set to get different results. I am using datasheet Rev. B


As an example, The receive registers are outlined on page 14. Looking at the lane inversion feature, this is Bit 6  of the RX Configuration registers for each channel. Is lane inversion active when it is set or clear?

The same for RX EN, is it receive enabled when set or clear? I don't want to assume anything.