Question Are there any higher frequency EMC tests available for the ADXL345? Answer EMC testing has been performed for the 10 Hz – 1000 Hz but not at the 127.7 MHz
frequency. These products are used…
Question How to add ESD protection diode to the ADXL345 Answer The ESD protection are needed for pin 1 (VDD I/O) and pin 6 (VS) on ADXL345.
Just any ESD diode would work and serve the purpose of protection…
Question Could you give us some more detail of the ADXL345 insite Answer The internal filter is as follows:
1. There is a single pole analog anti-aliasing filter at ~1.6kHz.
2. The digital filter is…
Question I still wonder about whether the sensors fulfill the demands of the MRI
environment? It has to withstand a static magnetic field of 3 Tesla (i.e. it
should not contain any ferromagnetic materials…
Question How long does the ADXL345 take to recover from a high-shock overload before
it starts to operate normally?
Answer If accelerometers are exposed to stimulus above the rated range they simply…
Question I want to use ADXL345 in airbone application and I am concerned about the
performance in electro magnetic fields. But it seems there is no information
about this in the datasheet. Answer The…
Question We use a ADXL345 in a product were we used to have a power consumption around
42µA. In the latest shipment of this product we use the same components and
firmware but the power consumption…
Question I have some questions about the 0x31 DATA_FORMAT register of our ADXL345.
If I set DATA_FORMAT = 0x00, make the Gee Range = +/-2g, then I can get 1g =
256 and this is reasonable (2^10/4g=256…
Question ADXL345: Is it possible to turn off Vs, while keeping Vddio powered, to save
power? Answer Yes but turning off Vs means reprogramming the entire part each time Vs is
powerd-on. Standby mode…