Sensors Library

FAQs AD590JF: FAQ

FAQs
AD

AD590JF: FAQ

Created over 4 years ago

Was this helpful?

AD590: Which side of ceramic flatpack of AD590JF should be connected to the object whose temperature I wish to measure?

Question I am using a thin layer of thermal epoxy to attach the AD590JF to the host component but it is not clear to me what is the optimal attachment side to use on the sensor? Answer For the AD590JF…
AD590: How to measure temperature of a steel plate

Question I want to use AD590KF to measure the temperature of a piece of steel plate. Which side(Side 1 or Side 2) should be attached on the steel plate? And how he attach the AD590KF to the plate?…
AD590: Long term drift

Question You state a worst case long term stability of 0,1°C in your application note 272. Is this value not connected to a maximum operation time where it is valid? With other words: can I (for example…
ad590: Maximum power dissipation

Question I want to know the maximal power dissipation of the AD590 (Two Terminal IC Temperature Transducer). Answer The maximum power dissipation is the following: P= V*I = your maximum supply voltage…
AD590: Measuring the current output

Question In the Test Center, we have a project on measuring low temperatures on Aircraft. In this case, there is a need to measure temperature as low as -55 deg centigrade. Therefore we're interested…
Maximum Load of AD590

Question what can be the Maximum value of this Load Resistance which will not affect Linearity, stability of the AD590? Answer Regarding AD590, the part should work correctly as long as the voltage is…
What is gold plating thickness used on leadframe of AD590JF?

Q What is gold plating thickness used on leadframes of AD590JF? A 50 Micro-inches is standard gold plating thickness for leadframes on Mil/Aero parts.