Question
Is the truth table on page 6 of 16 correct for the ADG854? Zero means theswitch is connected to B and a logic one means the switch is connected to A?
On page 10 of 16, as well as in the description of the evaluation board, it isthe other way around.
Answer
The Table 5. Truth Table on the ADG854 Datasheet is correct.
Therefore, on page 10, Table 1. Control via Link L2/Link L3 should be like this.
Switch StatusL2 and L3 PositionAudio Device 1Audio Device 2BInactiveActiveAActiveInactive