ADG465 Frequency and phase response

Hello Community,

I was able to find frequency and phase response for channel protection ic ADG467 but not for the ADG465. Can I consider as the same? If not, where can I find this information? I also couldn't find any simulation model.

Thanks in advance.

Parents
  • Thanks Michael for the quick answer.

    We are considering use ADG465 or ADG467 as input protection (Voltage Clipper) for our AD7760.

    We could use a Schottkly diode circuit for this, but we are worried about noise figure, frequency deviation, bandwidth and (most important) phase response associated to diode circuits.

    By the way, let me make another question: The ADG467 frequency and phase curve have no information for very low frequencies (lower than 100kHz), Do you have a better images from that curves?

    Thanks,

Reply
  • Thanks Michael for the quick answer.

    We are considering use ADG465 or ADG467 as input protection (Voltage Clipper) for our AD7760.

    We could use a Schottkly diode circuit for this, but we are worried about noise figure, frequency deviation, bandwidth and (most important) phase response associated to diode circuits.

    By the way, let me make another question: The ADG467 frequency and phase curve have no information for very low frequencies (lower than 100kHz), Do you have a better images from that curves?

    Thanks,

Children
No Data