ADV3202 - cropped video signals

Question

Hello everybody, 
 
 I have a problem using the ADV3202. All output video signals are cropped at about 900 mV in a manner, that no sync is transmitted. VPOS is connected to +5 V, VNEG is connected to GND, VREF is supplied with 2.5 V and VCLAMP is connected to GND as well. (I tried several connections for VCLAMP and VREF, but neither worked) 
 
 Attached I have a snippet of the schematic and a sample of input and output video signal. 
 
 Can you please give me a hint to solve this problem? Thanks in advance.

EZAdministrator · Accepted Answer

This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum. Thank you, EZ Admin)

ADIApproved · Answer

Hi, Daniel. 
 Please resolder the 1k and 2k resistors to all the OSD pins. Can you connect directly to GND the VREF and VCLAMP? 
 Regards, 
 Anna

Partner Forums

Partner Libraries

Products Mentioned

ADV3202 - cropped video signals