my requirement for switching DC Voltage upto 48V or 24V
maximum current is 1Amps
when i see this ADG1402B chip , it can support upto 430mA. so im thinking to combine two chips and rise the current range upto 850mA. is it possible? or please provide me the CMOS switch which can afford current range upto 1A.
It is possible to parallel up our switches to increase the continuous current however you could also have a look at the load switches we have available at the following link
Load Switches | Analog Devices
They might meet your needs.
A logic voltage level of 3.3V on the EN pin will be OK to turn on this switch. The datasheet specifies the min logic activation level (VIH) for the EN pin as 1.0V while to turn off this switch you need to guarantee a voltage below 0.4V (VIL).
Do not hesitate to let us know if you need additional information, thanks.