Post Go back to editing

ADG836L latching up, possible static problem?

Hi all, 

I have a design using the ADG836L mux.  The inputs to the mux are connected to a pogo pin assembly that is used in a production environment to program microcontrollers.  I am using these multplexor/switches to rout the signals to the device programmer.  I am experiencing an issue where the first ADG836L in the chain gets in to a latched condition and starts drawing excessive current.  Cycling power temporarily fixes the problem until it happens again.  

My initial thought is that there is a static charge built up on the surface that the pogo assembly contacts and that this is causing this fault.  I was hoping someone might be able to provide some clarification as to what might be causing this problem and how I might go about preventing it.