ADG419 Application

Hi, Naidu.

As long as your signals at S1 and S2 are within Vss to Vdd signal range, you should have no problem using the ADG419. Just bear in mind that you will need to power up the ADG419 with dual supplies (greater than +/-5 V, as we cannot guarantee normal operation with lower supplies), and that this part is specified with VL = 5 V, and VIN = 5 V.

Yours sincerely,

Igor Ono.

Thanks Ono,

My power supplies are +/- 12V and S1 and S2 are 12V and -12V

VL=5V and VIN =3.3V.

Are the above supplies ok?

Regards..

Thanks Ono,

My power supplies are +/- 12V and S1 and S2 are 12V and -12V

VL=5V and VIN =3.3V.

Are the above supplies ok?

Regards..

Hi, Naidu.

Your supply voltages and voltages at S1 and S2 are within datasheet limits, so your device should work as expected.

Yours sincerely,

Igor Ono.