Products In This Thread

AD8010 Production
The AD8010 is a low power, high current amplifier capable of delivering a minimum load drive of 175 mA. Signal performance such as 0.02% and 0.03° differential...
Datasheet
AD8010 on Analog.com

AD8180 Production
The AD8180 (single) and AD8182 (dual) are high speed 2-to-1 multiplexers. They offer -3 dB signal bandwidth greater than 780 MHz along with slew rate of...
Datasheet
AD8180 on Analog.com

AD8180 Production
The AD8180 (single) and AD8182 (dual) are high speed 2-to-1 multiplexers. They offer -3 dB signal bandwidth greater than 780 MHz along with slew rate of...
Datasheet
AD8180 on Analog.com

  • State Verified Answer
  • +1 person also asked this people also asked this
  • Replies 1 reply
  • Subscribers 22 subscribers
  • Views 1973 views
  • Users 0 members are here
Options
Related 

        

            Post
             Go back to editing
        

    

    


    

    









		












	
	
			
	
			
		
	
	
		

		
Zero output for AD8010



		

			

									
					    gkrao
					
							

			
				
									
											
			
			
				
    
			
			
			    	
			                    
                
				                on Mar 22, 2019 
				
			
			
		
    

				
		
    
		    		    
		    
		    	
			
    HI,
    

    we are implementing 2 to 1 multiplexing circuit using AD8180.
    

    Application1: Toggle between 0V and 1.3V using SELECT  Pin ( i.e, 0/5V TTL).
    

    Application2: Toggle between -0.6 V and -5V using SELECT  Pin ( i.e, 0/5V TTL).
    

    In both cases we are getting zero output even with Enable pin Low (GND) and Select pin toggle between 0V and 5V.
    

    By suspecting IC failure i have replaced with new ones.but facing same problem.
    

    please suggest a solution.
    

    Regards
    

    GPR