hope you're doing well. Juste wondering if the is an example of python code to configure the Tx/Rx of the ADRV9009+KCU706.
I follows some example on the website :https://analogdevicesinc.github.io/pyadi-iio/devices/adi.adrv9009.html
but some command return error : like setting the sampling frequency or the RF bandwith.
sdr.tx_rf_bandwidth = 200e6 # (100 MHz => 122.88MHz 200MHz =>245.76)AttributeError: can't set attribute
sdr.tx_sample_rate = 245.76e6AttributeError: can't set attribute
Also when i set the Rx/Tx_lo, nothing appends.
ADRV9009 requires profiles to change the sample rate and RF bandwidth. You must use the profile generator which is in the design package: http://www.analog.com/media/en/evaluation-boards-kits/evaluation…
Moved to Software interface tools.
ADRV9009 requires profiles to change the sample rate and RF bandwidth. You must use the profile generator which is in the design package: http://www.analog.com/media/en/evaluation-boards-kits/evaluation-software/ADRV9008-x-ADRV9009-profile-config-tool-filter-wizard-v2.4.zip
I also assume you are using the ZC706 and not the KCU706 (I don't think this is an actual FPGA board).
Ok Thankx Travis, i'll take a look at the USER guide for the profile configuration.
Yes for the FPGA it is the ZC706.
Hi Travis, thanks very much, i seems to work well. I FOund out somes examples!