Hello , I am using AD9371and ZC706 board. I have installed GNU radio and gr-iio-ad9371 branch to my Ubuntu16.04.and I have installed in /home/usg/gnuradio/gr-iio-ad9371/gr-iio/
I have a problem that GRC is not connecting to the ZC706 board. I am making the files my Ubuntu host PC(VM ware).
Ping to the board gives me communication.
PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.64 bytes from 192.168.1.2: icmp_seq=1 ttl=128 time=0.608 ms64 bytes from 192.168.1.2: icmp_seq=2 ttl=128 time=0.632 ms
I am using one of the example projects to run. And it gives me an error when "execute the flow graph".
Executing: /usr/bin/python -u /home/usg/gnuradio/gr-iio-ad9371/gr-iio/iio-examples/top_block.py
Using Volk machine: avx2_64_mmx_orcERROR: Unable to find host: Name or service not known
In my FMComms properties URI is configured as "uri" and shows in the blocks ":ip...local"
How can I correct this ? Why the board is not connecting ?
I have referred https://ez.analog.com/sw-interface-tools/f/q-a/164522/boot-adrv9361-z7035-board/372760#372760
If the URI is ip:local it assumes you are running gnuradio on the board itself. Change this to the IP of the board.
how to change this, could you please give me the steps
gr-iio is not specific to AD9371 and all the examples are for AD936x devices or generic blocks.
Thanks for the information.
Is there any reference files that I can refer for 9371/9375, so that I can begin with.
No examples exist for AD9371, but you should be able to just modify existing examples by replacing the source and sink blocks.
Could you please tell me which files I need touch in order to make the AD9375 to communicate with Gnu radio.
I need to modify the source and sink blocks, which files I need to modify ?
Being answered here: https://ez.analog.com/linux-software-drivers/f/q-a/165611/gnu-radio-error-ad9375-zc706