Parallel digital potentiometers

Hello,

In my application I will need four digital potentiometers (AD5272/AD5274), which I will connect parallel. Could you tell if that is possible? If it is possible, you can give instructions how I will manage this.

Thank you,

Andreas Karkotis

Top Replies

mthoren_adi
Apr 20, 2018 +1 verified
Hi Andreas, Is the concern the fact that the 3-state ADDR pin only gives you 3 I2C addresses? You could either use an I2C multiplexer, or either LTC4316 or LTC4317 Address Translators: http://www.analog…

Parents

+1 mthoren_adi

on Apr 20, 2018 12:31 AM
Hi Andreas,

Is the concern the fact that the 3-state ADDR pin only gives you 3 I2C addresses? You could either use an I2C multiplexer, or either LTC4316 or LTC4317 Address Translators:

http://www.analog.com/media/en/technical-documentation/product-selector-card/4316.pdf
Cancel
Up +1 Down

Reply

Reject Answer

Cancel

Reply

+1 mthoren_adi

on Apr 20, 2018 12:31 AM
Hi Andreas,

Is the concern the fact that the 3-state ADDR pin only gives you 3 I2C addresses? You could either use an I2C multiplexer, or either LTC4316 or LTC4317 Address Translators:

http://www.analog.com/media/en/technical-documentation/product-selector-card/4316.pdf
Cancel
Up +1 Down

Reply

Reject Answer

Cancel

Children

No Data