ADALM2000 Start-Up Guide+

microguy on Jun 30, 2020

This produce could use a simple, easy-to-follow user guide. It took me some time to discover I needed to install drivers for the ADALM2000 instrument. That information should have been available right at the start. The set-up and installation web pages are among the worst I have had to use in a long career. Please, do something to help people get a quick, successful start. Don't waste users' time.

0 rgetz

on Jun 30, 2020 4:46 PM over 1 year ago
Sorry - this has been on the list for a long time. We thought the doc was OK - most people don't have issues (but there is always room for improvement).

When you plug in the M2k into your PC, the first thing that happens - it should mount the drive - and the file on the mass storage device - the index.html file - the first thing is says to do is install the drivers, and library. Did you see that?

Thanks
Cancel
Up 0 Down

Reply

Verify Answer

Cancel
0 mark.allie on Jul 8, 2020 4:55 PM over 1 year ago in reply to rgetz

Where are the drivers? I searched in the unzipped scopy directory but did not find any drivers.
Cancel
Up 0 Down

Reply

Verify Answer

Cancel
0 mthoren_adi

on Jul 8, 2020 5:14 PM over 1 year ago in reply to mark.allie
Hi mark.allie

the quick start:

https://wiki.analog.com/university/tools/m2k/users/quick_start

has a link to the drivers and installation instructions (for Windows/Linux/Mac).
Cancel
Up 0 Down

Reply

Verify Answer

Reject Answer

Cancel
0 mark.allie on Jul 8, 2020 8:32 PM over 1 year ago in reply to mthoren_adi

Yes thanks. I actually looked around again and found what I had previously found the first time I installed Scopy. Thanks for a quick reply.

Mark Allie
Cancel
Up 0 Down

Reply

Verify Answer

Cancel