• ADF7012 question

    Dear Sir,

    Does the ADF7012 could only output the sigle tone without any modulation?

  • ADF7012 Cvco value

    When reading the product documentation, I see various recommendations for the cap value on the Cvco pin.  I've seen both 22nF and 220nF capacitors specified.  Which is the correct value for use?

    Thanks,

    Tim

  • ADF7012 and OOK modulation

    I have quite simple task - I neet to get running ADF7012 chip together with MSP430 MCU so that MSP430 is able transmit simple messages using OOK modulation. I already spent a couple of weeks, but still haven't managed to get the stuff going (nothing is…

  • BPSK with ADF7012

    Hello 

    We need to design a commerical low power Software Radio that we were awarded a contract to build,  1m units.  We have a very low data rate to only transmit a small data packet with gps information i.e. wildlife tracking on ISM platforms.  It’s BPSK…

  • GFSK modulation in ADF7012

    I have a few questions regarding ADF7012:

    -What is the processing delay of the Gaussian filter for GFSK?

    -Is it possible to change GFSK BT value to less than 0.5?

    -What methods can be used for variable-modulation-index (continous) transmission?

    In…

  • ADIsimLINK Configuration for ADF7012

    Hello,

    Our customer try to use EVAL-ADF7012DBZ3 and EVAL-ADF70XXMBZ2. But, we couldn't select ADF7012 from "Device Type" on the GUI of ADIsimLINK Configuration. How should we do for using ADF7012?

    Best regards,

    Akira

  • Output Impedance of ADF7012

    I am using ADF7012 transmitter in VHF band (145.5MHz), to get maximum power transferred I need to match the output Impedance of the transmitter to the load Impedance (i.e complex conjugate).

    The problem is that, the data sheet of ADF7012 does neither…

  • Output Impedance of ADF7012

    I am using ADF7012 transmitter in VHF band (145.5MHz), to get maximum power transferred I need to match the output Impedance of the transmitter to the load Impedance (i.e complex conjugate).

    The problem is that, the data sheet of ADF7012 does neither…

  • ADF7012 RF output impedance

    Dear,

    Can anyone kindly provide us RF output impedance of ADF7012 around 145MHz?

    We'd really appreciate if anyone has data on this as we're not equipped with load-pull measurements.

    Thank you in advance!

    hojun