I can play a tone using 'tone', but when I use 'aplay' to play a wav file I get no output on my SPORT port.

The only difference I can see when I look at the registers of the ssm2602 is that it is in 16 bit mode when I play 'tone' and…

I completed my upgrade to 2011R1-RC3 and I am still having issues with the abstraction of the SPORT3 to a SSM2602.

I've updated:

static const u16 bfin_snd_pin[][7] = {

         SPORT_REQ(0),

         SPORT_REQ(1),

         SPORT_REQ(2),

         SPORT_REQ(3),

};

static…

Folks,

I have a very peculiar problem going on in a design of mine with a BF527 and the internal SSM2602. I'm using both the mic and line in inputs and when I select the mic input, I do get - as expected - the mic going to the AD but when I select the…

Hi there,

I am trying to setup the SSM2604 to run as clock master. I can't seem to get it to generate the clock (whilst I can get the SoC to generate the clocks).

I have copied the bf5xx-ssm2602.c method and this is in my codebase :

static int…

This works:

root:/> arecord -Dhw:0 -d 10 -t wav -r 48000 -f S16_LE -c 2 test.wav

This doesn't:

root:/> arecord -Dhw:0 -d 10 -t wav -r 44100 -f S16_LE -c 2 test.wav

Recording WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, …

Hi there,

I am setting up a custom board. Using your SSM2602 chip.

Right now I am writing an ALSA machine driver.

I get the following error when the system boots :

sound: ASoC: CODEC DAI ssm2602-hifi not registered

I have tried to fix this problem…