I'm still struggling with the serial download for the ADuCM350.
I have now revision 0 of AN-1262. On page 3, CS is defined as
0x00 - NumberOfBytes - SumOfDataBytes
According to what I sniffed from the CM3WSD, CS should rather be defined as
The LPTIACON0 description gives bit 0 as:
In case this is not legible, this says:
Bits Bit name Description
0 TIAPDEN TIA Power Down. LPTIA0 power-down control bit. 0 Power up. 1 Power down
Whilst the description for LPTIACON1 gives bit 0 as…
Question on the AD8138 input referred noise of the Vocm input noise specification:
The datasheet lists this as 17nV/rtHz, which is more than 3 times that of what the datasheet claims in the features. Does this noise always apply and scale with BW and…
Hi everyone, thanks Craig for help.
I try to use UART0 interrupts. I initialize EVT8 as isr_uart0_rx, EVT10 as isr_uart0_tx. I use Terminal program to send and receive bytes from PC to my target board. I send one byte to target board, isr_uart0_rx works…
I've had problems finding information on how AIN4-AIN7 are connected internally in the ADuCM355. They are not included on any of the AFE die/switch matrix figures in UG-1262 or the Datasheet other than in "Figure 8. ADC Input Stages" in UG…
I am trying to build the old project in visual dsp 3.5++ , which was built in development tool 6.1. In this project there is .dsp file which as following code
.GLOBAL ___lib_prog_term;.EXTERN ___lib_setup_everyth…
Hi, thank you for you're answer.
I have upgraded my software to the October update, wich is working.
My board come from http://www.kk7p.com/dsp.html , i'm using the windows loader that is on this web page.
I am finaly able to load a _very_…