Is there any problems which connect INTVCC together of two parallel chips ?
Could you provide LTM4650-1's thermal features
1) power dissipation:(LTM4650-1's power consumption)
2) thermal resistance(Junction-to-Case):
3) thermal resistance(Junction-to-Board):
4) Maximum operating junction…
12v transfer to 0.95v50A. there is an error in vout, vout got to 1.68v as the below picture.as u see, isn't any problem in my schematic ?pls help and give me some advice.
Can you provide your email address and I will send you a LTPower CAD file for 300A operation.
Is it for LTM4650 or LTM4650-1 or LTM4650A
To generate a 300A template, blue box in the converter specification are required to be filled in.…
The following test question is customer response
1. Spec p26 circuit ,
VOUT SENSE connection is not the same as EV KIT Application note (EV Kit part number DC2378A-B )
2. Customer demand is that both sets of output must have VOUT Sense(How to…
Thanks for your great response. When I gone through your attachment I came to know C1, C2 are needed to attenuate the switching noise.
LTM4650 datasheet covers C2 capacitor through some application schematic but no where mentioned mentioned…
We use LTC2977 to trim DC/DC(LTM4650) with an external feedback network.
When the load transient, if LTC2977 exactly monitor the pulse (for example, 6mV diviation), if LTC2977 adjust its DAC to trim DC/DC ? Because the DC/DC will return back after…
I moved this thread to the "CrossCore Embedded Studio and Add-ins" forum as it appears a tools related issue.
I suspect that one of the automatic file attributes is being replaced by a macro define in the compiler generated assembly…
I want to build a composite amplifier using the Figure 77 of the datasheet ADA4870-1. It says that the voltage offset is less than 500 uV. I simulate this circuit using LTSpice, when driving ada4637-1 with 0V and monitor the output of ADA4870-1, it is…