I moved this thread to the "CrossCore Embedded Studio and Add-ins" forum as it appears a tools related issue.
I suspect that one of the automatic file attributes is being replaced by a macro define in the compiler generated assembly…
I want to use the AD7768-1 with 5V AVDD1 = Vref and 3,3V VDDIO. In demo-circuits the AVDD2 is connected to probably noisy VDDIO!Wouldn't it be better to supply AVDD2 from 5V over a R-C-Filter, that would lower the voltage to around 3V?
Is it possible to bypass the current protection by shorting the SNS+ and SNS- pins together with a trace?
Dear Analog Devices Team
In the attached picture, please mark the location of pin 1:
For the future production of these devices I would suggest not to place any pin 1 marking near any pin that is not pin 1.
I used the ADA4945-1 as ADC front-end (LTC2380-24) with supply rails centered to ADC 2.5V Vref ( Vcc= +7.5 / Vee = -2.5V for 10V total supply).
The FDA is configured as fully differential filter, with 2 cutoff frequencies. 2 small relays allow…
Hi, I'm using adrv9361 board. I want to use ethernet 1 (the one which is connected to PL). I'm using xilinx vivado with TEMAC core. At first I send continuously same packets. The problem is that there is a chance that I get the wrong packets. And in the…
I have a number of questions with regard to ADA4350-1.
We are planning to get EVAL-CN0407 evaluation board to evaluate ADA4350-1.
I cannot see EVAL-CN0407-1-SDPZ board in buy list, is it possible to order only EVAL-CN0407-1-SDPZ for replacement.