i am trying to generate 7mhz 50%duty cycle signal and i am trying to do is How can i interface ltc6904 with Arduino ?
Anybody know what state the CLK output pin for the LTC6904 goes into when it is disabled (by sending a SPI/I2C command to set control bits CNF1=0 & CNF0=1)?
In our application, we need to disable the CLK output of the LTC6904. But, the datasheet doesn…
Hello. LTC1068-200 seems like the right part. Your low pass frequency is really low.
You are talking about frequencies in the kHz, even with 200.
LTC6093 and LTC6904 provide digitally programmable clock outputs, (SPI or I2C).
Also check this out for…
Hi EZ team,
My customer is using LTC6409 for driving LTC2208 and need to simulate between these devices including the PCB trace with Keysight ADS. I have tried to find out the Spice models or S-Parameters in ADI web site but can't find out them.
The 4FSC clock looks like the most likely suspect -- the LTC6904 frequency error can be 0.5% to about 1% (+/-0.75% max initial frequency error), which is too large. The availability of off-the-shelf 4x PAL subcarrier crystal oscillators is slim…