I simulated the LPF (using non-ideal parts), the result was terrible and dependent on the components' company! I think I should buy some filters from mini-circuit company.
I found LTC6400-26 with the fixed gain at 20dB.
But when I simulated…
Don't use one output. You will get lots of clock feedthrough and junk. Whatever you do, make sure to use the differential outputs to cancel this junk.
Most op amps don't have the bandwidth and slew rate to keep the 9910's nice SFDR. You might ask…
2009-06-26 13:26:33 fw_env.config
Rob Maris (GERMANY)
upon today's SVN update, I encounter a problem with my fw_env.config right in the vendor/..../boardxxx subdirectory where I have put it together with other files which are copied…
The table indicates the supported lanes and interpolation modes. From the data sheet: "A value of yes in Table 26 means the interpolation rate is supported for the number of lanes. A blank cell means it is not supported."
We planing a HDMI Matrix project. The input/output borad will be daughter board. We would like to calculate what distance can be routed in FR-4 PCB. Since ADV7626/22 is support advative equalization. We can't expect how long PCB trace can be recovery…
[2018/8/6 15:26:37] frequency is 4998 Hz
[2018/8/6 15:26:38] a_vrms_in is 218365 mV
[2018/8/6 15:26:38] b_vrms_in is 219075 mV
[2018/8/6 15:26:38] c_vrms_in is 222085…
Is there a solution for RF output bw 26G-30G ?
I am not finding one in :
Thanks Lars, This is the output:
root@adifmcomms3bsp:~# ls -l /sys/bus/iio/devices/iio:device*/*-rw-r--r-- 1 root root 4096 Jan 26 19:28 /sys/bus/iio/devices/iio:device0/calib_mode-r--r--r-- 1 root root 4096 Jan 26 19:28 /sys/bus/iio/devices/iio:device0…