• RE: LTC4314 Enable vs Ouptuts

    Hi Diode, 

    Both. Each of the LTC4314 multiplexer's ENABLEx pins is going to connect(or disconnect) the corresponding SCLOUTx/SDAOUTx bus segment. So if both ENABLE1 and ENABLE2 are driven high, the LTC4314 device is going to connect both SCLOUT1/S…

  • LTC4314 Level Syft

    Hi,

    My customers are considering the LTC 4314.

    Using a 1.8 V master, the level shifts to 1.8 V on the primary side and 3.3 V on the secondary side.

    # 1  When setting the bus on the primary side to 1.8 V, are there any problems with the following conditions…

  • Does LTC4314 remain bus-friendly when powered down?

    I am evaluating the LTC4314 mux for a multi-master I2C system, where to save power (system runs on batteries for a year), I need to power down one of the masters, including its mux, when it is not in use.   Other devices will continue to use the I2C bus…

  • LTC4313/LTC4314 with LTC4300-2 and high VOL device.

    Hello.

    I am currently thinking about using LTC4313/LTC4314 with LTC4300-2 and
    non-compliant I2c device that drive a high VOL.
    In LTC4313/LTC4314 datasheets , VOL is not defined but VOS(Buffer Offset Voltage) is defined.

    example
    SDAIN VIL= 0.6[V]
    VOS= 0…

  • TAGS LIST: Interface and Isolation

    LTM2894
    LTM2895
    LTM9100
    LTM2885
    LTM2881
    LTM2882
    LTM2883
    LTM2884
    LTM2893
    LTM2886
    LTM2887
    LTM2889
    LTM2892
    LTC1694-1
    LTC4300
    LTC4310
    LTC4302
    LTC4305
    LTC4304
    LTC4303
    LTC4306
    LTC4307
    LTC4307-1
    LTC430…