The LTC4010 does not have a reference design, but the very similar LTC4011 does and you can use that for a reference for this part selection:
Take a look at the LTC4011 demo board: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/dc674b.html
There is a schematic/BOM in the demo manual.
LTC4011 is nearly identical to LTC4010 but it has…
No, unfortunately. I would recommend LTC4010 or LTC4011 for such a design.
I might recommend LTC4011 for your application. This is a NiMH charger with proper termination functions (which I recommend for charging at 1.5A). It is a buck charger without a boost feature, so you will need to follow it with a boost converter…
Hi, I would like to use LTC4011.
So, I have a question. Please help me.
I am experimenting with the LTC4011.
I'm writing a circuit diagram first.When checking the reference circuit, there is an unknown point…
In my circuit, after power on, /CHRG LED was blinking (0.1sec on in every 1 sec) during the first 10 second , /CHRG LED was ON during the next 2 second
and finally /FAULT was detected.
I attached vcc,tgate waveform I monitored.
just before /FAULT was detected…