Hi Ryan,
If you go to https://www.analog.com/design-center/evaluation-hardware-and-software/linduino.html you will find driver code for the LTC2373-18.
Using this code and driving the RDL lines of the individual LTC2373-18s in sequence you should be able…
I want to use LTC2373-16 for high speed data acquisition.
I have purchased evaluation board DC2071 and the compatible interface card Linduino 2026C.
Quickeval and LTC2374.exe (there is no link provided for LTC2373) do not have options for acquiring data…
Hi,
As I did not get any answer to my question from CIC EMEA so far 
, I will try this way...
I use the LTC2373-16 ADC. In the datasheet it is written that the REFIN pin should be decoupled with a 100nF ceramic capacitor. But in the Eval Board schematic…
2009-12-18 09:50:18 upgrading
Filip Vanalme (BELGIUM)
Message: 83699
Hi,
I'm finally upgrading to the latest versions of toolchain and kernel. I installed blackfin-toolchain-09r1-10.i386.rpm and blackfin-toolchain-uclibc-default-09r1-10.i386.rpm…
2008-02-18 04:18:22 struct video_device
stop go (UNITED STATES)
Message: 51190 Hi,
I'm trying to compile the kernel, and my compile is breaking due to what appears to be some sort of video driver framework disjoint.
/include/media/v4l2-dev.h…
Can anyone tell me the behavior of the LTC2326-18 if you only clock out 16 bits between conversions. We thought we would simply get the most significant 16 bits and the bottom 2 bits would be discarded when the next conversion is started, however, we are…
2010-11-18 08:12:18 Alsa driver issue
Shyam sundar (INDIA)
Message: 95944
Hello world,
I am using Alsa 1.0.18 on BF537 board.
When I try to list the sound cards on the board,I do get the following message
root:/> aplay -l
**** List of PLAYBACK…
2008-11-18 18:16:54 Run in ADSP-BF535??
Antonio Carmona (SPAIN)
Message: 65461
Hello,
I'm new to the forum and again in the development of embedded systems, I chose the Blackfin to venture into this passionate world. I have the opportunity to get…
So, im using the ad7606c-18 instead of the -16, and I use a SCLK with 16.67 MHz and works correctly, but when I increase it to 25 MHz it does not work. I'm using the EVAL-AD7606C18FMCZ board.
Another question that I have, if you know if the FlexSPI…
2006-05-25 18:18:32 ppifcd_test on BF537-STAMP
Michael Benjamin (UNITED STATES)
Message: 7963 Does the ppifcd_test Blackfin-Test program work on the BF537-STAMP board? If so, could someone help me?
I currently have the following Kernel settings:
…
