Hi,As I did not get any answer to my question from CIC EMEA so far , I will try this way...
I use the LTC2373-16 ADC. In the datasheet it is written that the REFIN pin should be decoupled with a 100nF ceramic capacitor. But in the Eval Board schematic…
I'm starting a new project with the following specs
1 - 16 analog audio inputs 2 - 16 analog audio outputs 4 - Matrix mixing capability 5 - Uses SigmaStudio 6 - Minimum sample rate = 96 KHz
Which DSP chip would you recommend?
Is ADAU144x my best…
There is no PSRR information available for this part. If you follow the recommended supply bypassing and use a linear regulator you should not have any performance issues.
This webcast gives an overview of recent trends in radio hardware in the military communications (MILCOM) field including what technologies and requirements are driving these trends. The main focus will be the shift to more widespread satellite communications…
I am designing a digital audio mixer with 16 audio input channels and 16 output channels. A combined DSP/ARM provides processing and Ethernet capabilities.
In order to speed up the process, I'm using a module that includes an OMAPL138. In…
I have a question LTC2321-16.
Is it okay if we can change the 220pF in front of the ADC to 10pF?
Hi! I have problem iwth using ltc2000-16. SFDR = 47dBc(fout = 270MHZ, fdac=1200MHz) Rfsadj = 500Ω, Rload = 12,5Ω, LIN_DIS = 0, LIN_ GN = 75%, power is fine. What's the matter?