The microcontroller you selected is using a half duplex data transfer protocol on the QIO0/MOSI line. This is not compatible with how the LTC2357-16 operates.
One possible solution is to use QIO0/MOSI for the SDI line and then use QIO1 to receive data…
AD7606模拟输入带宽有限，10v Range时为23kHz, 5v Range时为15kHz, 信号频率为10kHz时，已经衰减了大约10%. 可以考虑用LTC2357-16.
LTC2357-16 has four power pins. VCC, VEE, VDD and 0VDD.
VCC and VEE are for anolog power supply. And 0VDD is I/O interface power supply which should be supplied with didital power.
However for VDD, the datasheet writes " the 5V core power supply ". What…
I would like to interface an external FPGA (on an eval board) to the DC2365A-B LTC2357-18. Is this possible? Is there documentation describing how this can be done?
I'm starting a new project with the following specs
1 - 16 analog audio inputs 2 - 16 analog audio outputs 4 - Matrix mixing capability 5 - Uses SigmaStudio 6 - Minimum sample rate = 96 KHz
Which DSP chip would you recommend?
Is ADAU144x my best…
I'm i the process of choosing an adc for a music project, the adc role is to read analog "control voltages" or "cv" that range between -10 and +10 volts, the data is used to set pitch of oscillators and control other parameters. First i chose the LTC2358…