• RE: ltc2344 operation

    The LTC2344 will hold the conversion result until the next conversion or until the LTC2344 is reset. Delaying the SPI read is not a problem.

  • RE: Question about LTC2344-16 coversion accuracy

    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,
  • 16 in 16 out DSP, Arduino

    Hi hi

    I'm starting a new project with the following specs

    1 - 16 analog audio inputs 
    2 - 16 analog audio outputs 
    4 - Matrix mixing capability 
    5 - Uses SigmaStudio 
    6 - Minimum sample rate = 96 KHz

    Which DSP chip would you recommend?

    Is ADAU144x my best…

  • RE: PSRR on LTC2325-16

    There is no PSRR information available for this part. If you follow the recommended supply bypassing and use a linear regulator you should not have any performance issues.

  • LTC2373-16 REFIN capacitor

    Hi,

    As I did not get any answer to my question from CIC EMEA so far  , I will try this way...

    I use the LTC2373-16 ADC. In the datasheet it is written that the REFIN pin should be decoupled with a 100nF ceramic capacitor. But in the Eval Board schematic…

  • 11/16/16 The Art of Military Communications

    This webcast gives an overview of recent trends in radio hardware in the military communications (MILCOM) field including what technologies and requirements are driving these trends. The main focus will be the shift to more widespread satellite communications…

  • 11/16/16 The Art of Military Communications

    11/16/16 The Art of Military Communications
  • 16 Input / 16 Output Mixer with AD1939 + AD1974

    Hi there,

    I am designing a digital audio mixer with 16 audio input channels and 16 output channels. A combined DSP/ARM provides processing and Ethernet capabilities.

    In order to speed up the process, I'm using a module that includes an OMAPL138. In…