Hi,

We were looking at the Internal Reference (REFIN) characteristics in page 4 of the data sheet of LTC2326-16. We see that the temperature Coefficient for the voltage at REFIN mentioned in the table is Typical : 2 ppm/°C and Maximum : 20 ppm/°C…

Dear,

My LTC2326-16 only display +/-5V when reading using arduino
I tried to read many topic but i did not find any related one.

First I connect the LTC 2326 correctly with internal reference, I have measured REFIN 2.048V and REFBUF 4.096V -> correct…

I can only get a range of +/-5V not +/-10V using the internal reference

I can only get a range of +/-5V not +/-10V using the internal reference for the LTC2326

Can anyone tell me the behavior of the LTC2326-18 if you only clock out 16 bits between conversions.  We thought we would simply get the most significant 16 bits and the bottom 2 bits would be discarded when the next conversion is started, however, we are…

Hi hi

I'm starting a new project with the following specs

1 - 16 analog audio inputs 
2 - 16 analog audio outputs 
4 - Matrix mixing capability 
5 - Uses SigmaStudio 
6 - Minimum sample rate = 96 KHz

Which DSP chip would you recommend?

Is ADAU144x my best…

Hello,

I'm trying to use the LTC2364-16, where the ADC input is driven by an op-amp buffer. It's a battery-powered application and I want to minimise power consumption, so the driver op-amp has a low GBW of only 350kHz. As I read the LTC2364-16 datasheet…

Hi there,

I am designing a digital audio mixer with 16 audio input channels and 16 output channels. A combined DSP/ARM provides processing and Ethernet capabilities.

In order to speed up the process, I'm using a module that includes an OMAPL138. In…