• LTC2324-12

    I hope that I'm in the right place

    I have a question regarding the Linear LTC2324-12:

    I'm using the internal reference (my case is 2.048V) - can I use REFOUTx as an input for resistor division? please see the attached file configuration?

    Thank…

  • LTC2324-16 conversion

    Similar question to that of DavidLee a few months ago.  The datasheet has me confused concerning how to transfer the data from the chip.

    Can I simply pulse !CNV high for 30ns, wait 220ns, then issue 16 (or 32 or 64) clock pulses and read the data?

    The…

  • LTC2324-16 Maximum Conversion Time?

    I've got a few questions about the LTC2324-16 ADC.


    This device does not appear to have an output that indicates that the conversion is complete.
    Therefore I am assuming that we start the conversion with a pulse on /CNV and just wait around for some…

  • LTC2324-16 OVDD and VDD current

    Hello,

    In LTSpice, the current drawn from VDD pin about 8A when LTC2324-16 is used in CMOS mode. What is the nominal current for OVDD and VDD pin when it is in CMOS mode and all channels are used in 2Msps?

    Regards

  • LTC2324 tCYC Time between Conversions Max time

    Q:

    LTC2324-12 Datasheet Page 5 Line:

    tCYC    Time between Conversions            (Note 11)  tCYC = tCNVH + tCONV + tREADOUT   min 0.5us  max 1000us

    and Page 6  Note 11:

    Note 11: Guaranteed by design, not subject to test.

    -----------------------------------------…

  • LTC2324-16 common external reference at Table.1

    Would you teach me what REFOUT1,2,3,4 Voltage means in Table.1 of the datasheet?

    According to functional block diagram and figure13b in the datasheet, REF PIN is driven by the external reference.

    As the result, reference buffers next to 16-BIT SAR ADC…

  • LTC2324-12这个ADC的时钟怎么给

    用到LTC2324-12,对此芯片的时钟怎么给有些疑惑,能否通过外部晶振提供时钟,还是通过外部处理器给时钟,谢谢

  • 2011-01-10 14:14:47     workqueue

    2011-01-10 14:14:47     workqueue

    Chris Brissette (UNITED STATES)

    Message: 97302   

    I have been hunting a random lockup, happens about once a week. Seems like it has something to do with the using the ttybf1 uart.  I have been looking to where workqueue…

  • 2011-09-14 14:43:03     user spi

    2011-09-14 14:43:03     user spi

    Dario Bueno-Baques (MEXICO)

    Message: 103388   

    Hi everybody:

    I planning to develop an application for the bf537 stamp where is necessary to acquire some data from and ADC (16 bits simultaneous sample i.e like AD7655) make…

  • 2008-05-14 14:34:13     Memory Protection

    2008-05-14 14:34:13     Memory Protection

    Henning Manteuffel (GERMANY)

    Message: 55833   

    I connected an FPGA to the Blackfin address/data bus for accelerating arithmetic computations.

    Is there a way to unprotect certain addresses in user space so that…