Hi,
I need a Octal-Channel 2 to 10 MSPS 14-bit Analog Input A/D Connector.i think "LTC2314-14" is suits for our application but LTC2314-14 this device consist how many input Chanel?
Please find the attached schematic and oscilloscope waveform .
Schematic: SDO , SCK and NCS are going to microcontroller. AIN is given REF (2.048V) but the output is coming 0. I am sending the output over UART at 19200 Baud rate.
Waveform:…
您們好
我想請問LTC2314-14的問題我照著附檔的電路圖走線我輸入一個Signal用微處理器經SPI讀取，然後讀出來的資料有問題想請問我這樣的電路圖設計，是否有問題?
The ADMV1013 should still work (i.e there will be conversion gain) but at a decreased level along with decreased linearity (OP1dB and OIP3). At 25C there will be only a small difference in conversion gain. These effects will be more pronounced at…
2011-01-10 14:14:47 workqueue
Chris Brissette (UNITED STATES)
Message: 97302
I have been hunting a random lockup, happens about once a week. Seems like it has something to do with the using the ttybf1 uart. I have been looking to where workqueue…
The Vcm on My Demo board DC1751 doesn't have output,is it wrong?And what the output type of FR and DCO ?LVDS?
The CLKOUT will follow the ENC signal with a small delay. If ENC is high then CLKOUT will be high shortly after that.
The default it 0 degree phase shift
There is no reason to dynamically change the phase of the output clock. It is something you set…
We are trying to use the ltc2258-14 with the serial programming mode, Double data rate CMOS. We can not get any output on the clkout line or any of the data lines. We have also been unable to read any of the mode registers.
Any thoughts as to why we wouldn…
Tcyc max is a carryover from ADCs that use the SCK to perform the conversion. If 1/Fsck was too long, the hold capacitor would start to lose charge through leakage and the conversion result would lose accuracy. The LTC2310-14 has an internal clock to…