2011-06-14 08:14:33 Error in g_zero? (Gadget usb)
Morten Kvistgaard (DENMARK)
We're trying to implement some device side usb on BF526 ezbrd. We can make the g_serial work. But the MS Windows driver for that one has…
2008-09-26 14:14:15 uClinux 08r1.5 not compiling
ashwin b (INDIA)
I am facing a problem in the last step: make
Here is the error I am getting:
cc -Werror -Wall -DHAVE_MKSTEMP -o cksum cksum.c crc.c print.c sum1.c sum2.c crc32.c
2008-09-23 14:27:14 fw_setenv on CM-BF537?
Ben Burleson (UNITED STATES)
Has anyone had success using fw_setenv on the Bluetechnix CM-BF537E?
I seem to have things configured at least half-correct becuase fw_printenv works fine:
2011-03-14 14:18:22 Problem with CONFIG_DEBUG_EARLY_SERIAL
Timur Aydin (TURKEY)
I was debugging an intermittent boot issue with my blackfin BF537-0.3 board. I defined the CONFIG_DEBUG_EARLY_SERIAL option in the hope of getting more…
2008-06-14 14:21:45 Framebuffer driver for ADV7171
Leslie Li (CHINA)
I'm working on a ADV7171 framebuffer driver these days, but encountered some problems here.
when I alter .fb_imageblit = cfb_imageblit, the kernel…
2010-11-14 01:14:10 EZ-Kit for BF533
Jawad Riaz (PAKISTAN)
I am trying to install linux on a EZ kIt for Blackfin....I have configured the host PC with linux GCC and other repositories...I need help on how to configure the toolchain…
Can i Use HMC584 for VCO which need to work for 12Ghz to 14 Ghz. Can i use any additional circuit to overcome the drawback ( If ANy)
Looking at the AD7732 datasheet (page 31 – top diagram), It looks to me like the ±10V comes from a voltage divider on each leg (108.5K in series with 15.5K to a common 2.5V reference). Hence a 0.125 divider per leg. If we also connect the next leg (2R…
I have a camera that outputs 14 bit of data plus sync. The signal in monochrome. I need a composite NTSC output.
What I am not sure of is how to input mono data to a color part. Do I just load into one of the R,G or B data lines? the same data into all…