I'd like to ask some suggestion about how to connect the clock with this kind of ADC (LTC2172-12 65MSPS). Is not so clear for me how to choose the clock frequency (and so the kind of VCO) and how to connect it to ENC+ and ENC- (if some kind of…
I am currently using DC1371B demo board to measure some parameters of my RF signal. ADC used with DC1371B is LTC2172. Clock signal I am giving to ADC is 20 MHz square wave. Software we are using is Pscope. When I collect the data from demo-board…
2008-12-08 07:12:12 SPI and BF-561
Filip Vanalme (BELGIUM)
this item might already been discussed earlier. I looked into some forum discussions, but never found exactly what I'm looking for...
I'm developing on a BF-561 board…
In ADI UART test examples we have:
/* NVIC initialization */
but inside NVIC_SetPriorityGrouping() function is written:
The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP…
I hope that I'm in the right place
I have a question regarding the Linear LTC2324-12:
I'm using the internal reference (my case is 2.048V) - can I use REFOUTx as an input for resistor division? please see the attached file configuration?
2008-12-03 12:12:16 browsing svn source via web
Kyle Schlansker (UNITED STATES)
Is there a way I can view svn tree through the web?
This page: http://docs.blackfin.uclinux.org/doku.php?id=version_control_systems&s=web&s=svn…
I am using an LTC2313-12 in combination with an ESP32 using (V)SPI functionality of the ESP32.
According to the description in the datasheet (https://www.analog.com/media/en/technical-documentation/data-sheets/231312fb.pdf -- p10/22 - Serial Interface…
Recently I made a board with a BF518 that used the PPI with a 12-bit interface. I used the pins corresponding to D0-D11 and it worked fine except that I had to shift the data because it was zero-filled in the high bits.
Is it possible to connect to D4…
I don't understand what Absolute Input Range in LTC2312-12 data sheet as follows mean. Please let me know.