• AD7988 - 1

    Good afternoon....

    I currently am using the above subject successfully in a design.  The power supplies are as follows: Vref = 2.5V, VDD = 2.5V and VIO = 2.7V - 3.6V.  Moving forward I would like to re-route the analog supply, VDD to track with VIO.  Can…

  • LTC6804-1 Automotive Grade??

    Is LTC6804-1 an automotive grade part i.e. AEC-Q qualified? What grade (0/1/2) is it? Thanks!

  • ADUM4121-1

    Can ADUM4121-1 gate drive handle 100% duty cycle?

  • LTC3300-1 problem with communication

    Hi everybody,

    I have problem with SPI communication between STM32 and LTC3300-1. I have only one LTC3300 and only one LTC6810. No IsoSPI, no DaisyChain. The ICs have separated CS/SS signals. I want to manage 6S Li-Ion battery pack. The literature, I have…

  • ADA4945-1 MODE polarity

    Hello AD,

    Please clarify the MODE polarity of the ADA4945-1 in the datasheet.

  • Differential video transmission with ADA4433-1 and ADA4830-1

    Hello,


    Thanks for providing the spice model of both ADA4433-1 and the ADA4830(-1).

    I'm trying to design a DC coupled differential transmission system using the ADA4433-1 and the ADA4830.

    The overall gain from input (ADA4433-1) to output (ADA4830…

  • ADA4310-1, 4311-1 with sloped PD0, PD1

    When using 4310-1 or 4311-1, with PD0 and PD1 pins taking values between 0V and whatever is considered logic high, does the amplifier behave reasonably? By that does it behave without going unstable or draining excessive current or requiring excessive…

  • RE: HMC666_using IF pin without 1:1 transformer

    Hi Josh,

    IF port could be used as single ended but the conversion loss will be 3dB more than specified in datasheet, and the isolation maybe worse.

    Regards.

  • RE: ADATE305 VDDO_0/1, VSSO_0/1 termination

    Hi Tom,

    Understood.
    Thanks for clear answer.

    Best Regards,
    Katsu

  • How to configure 1 TX-1 RX in No-OS

    Hi all,

        My design uses ADFMCOMMS2 module and ZEDBOARD, I want to transmit data using 1 TX- 1 RX but the default set 2  TX-2RX in No-OS, so what parameters in  default_init_param in main.c file I need to modify in order to  set 1 TX- 1 RX, thank you for…