My design uses ADFMCOMMS2 module and ZEDBOARD, I want to transmit data using 1 TX- 1 RX but the default set 2 TX-2RX in No-OS, so what parameters in default_init_param in main.c file I need to modify in order to set 1 TX- 1 RX, thank you for…
The Sense+ pin is connected to both Charger and Load. So,I would like to know how the LTC2942 could determine the operation mode between charge and discharge.
I want to use the AD7768-1 with 5V AVDD1 = Vref and 3,3V VDDIO. In demo-circuits the AVDD2 is connected to probably noisy VDDIO!Wouldn't it be better to supply AVDD2 from 5V over a R-C-Filter, that would lower the voltage to around 3V?
I bought the ADF70301 - 433 EZKIT and I can't find, in the ADF70301 data sheet, the noise figure of the transceiver.
So I'm here to ask: how can i measure the noise figure of the ADF70301 using the 433EZKIT?
Thank you for your support
Hi!We wanna use the LTC2439-1 configured with 16-Channel Single-Ended Inputs, the Reference-Voltage is 5.0V and the Input-Channel Voltages are from 0-5.0VBut the datasheet does not clearly describe the function for us with this configuration.We are not…
Can ADUM4121-1 gate drive handle 100% duty cycle?
I currently am using the above subject successfully in a design. The power supplies are as follows: Vref = 2.5V, VDD = 2.5V and VIO = 2.7V - 3.6V. Moving forward I would like to re-route the analog supply, VDD to track with VIO. Can…
I'm requesting the gerber files for this product mentioned above... is it possible to receive them. thanks,
How to test the receiver sensitivity in ADF7030-1 eval board?