目前将LT8610连接负载进行电源你的动态响应测试，但是发现该开关稳压器的输出端口在负载变换时，输出电压不发生改变，电压的变化没有展现出来，想请教一下，该开关稳压器的动态响应该如何测试，该开关稳压器的最大负载量是多大？

Hello,

Is it possible to input the pulse signal (0V / 3.3V) to the SYNC pin before powering on LT8610 (VCC = 0V)?

The maximum rating for the SYNC pin is 6V.

Best regards,

I'm currently performing some repairs on a control box for a vsat system and through the use of a handheld FLIR unit, we have noticed that the first of 3 LT8610 circuits gets warm. Ambient temperature of the board is 23 degrees Celsius and when the…

目前正在使用LT8610，实现 22V~40V 输入，21V输出，输出电流约20mA。目前按附件图制作的样品，但输出电压不稳定，工作频率较低、线圈有声响，且芯片容易损坏，请问如何解决。最好能提供一个可靠稳定的应用原理图，谢谢！

Hello,

I received an inquiry about OCP of LT8610 (and  LT8609S) from a customer.

Please advise about the following contents.

Q) When an overcurrent state is solved, how much time is necessary LT8610 returns to normal operation?    Is it immediate?  Or…

As title I could not determine whether the LT8610 is AEC-100Q compatible or not, a similar thread did not answer such question directly

If somebody knows it it would be of great help !

Regards, Matteo Ricciutelli.

如题所述，我们的原图理如下：

此电路换LT8610可以正常工作，我们此电路按典型电路配电阻，电感，电容，也不能正常输出，请帮分析一下，谢谢。

Hello, I have an existing PCB design where I used the LT8610, and I'd like to replace it (on a clean board) with one of the new variants (i.e. LT8610A/AB).

In reading the datasheet, I see I may need to make some minor tweaks to surrounding circuits…