oops you're right I meant LT8390.
In attached ZIP file.
LT8390 Demo Board DC2431A.zip
For higher output current capabilities, I would suggest looking on LT8711, LT8390A, LT8390 or LT3790.
If you are looking for a more compact solution you could look on to LTM8054/5 or LTM4605
Please use the article below as reference:
Some highlight that could be taken on the article is to tie the IMON pin on the master…
I design a power system by using LT8390A, Input Valtage is 9~60V, output voltage is 12V, output current is 15A, here is the schematic, Please help check
And I find LT8390A output current is 10A, so Can i use LT8390A in my design?
And what is…
The eventual goal is 100 Amps, @ 24Volts using 2 LT8390 boards in parallel. However in the test i preformed, motors stalled before 200 Watts.
I am trying to regulate the Output voltage
Load is definitely inductive since it powers motors through…
Can LT8390 do VIN=18V~50V，Vout=24V/12.5A (300W) by single chip?
Is there any reference design for the spec?
Thank you for your help.
Consult the LT8390 DC2431A circuit designM1 / M5 and M3 / M7 use two, but in M2 and M4 only one?
Customer : KyungShin
Application : Charging of supplementary battery for DVRS
- My customer is designing the schematic and calculating the Power Loss at Current Sensing Resistor
- when check the LTPowerCAD, They understanded at Power Loss at load…