I downloaded LT1117 demo circuit, from https://www.analog.com/en/products/lt1117.html#product-tools, for LTSpice simulation.
Open it and changed the input source to sine(5 .5 1k .05), a 5Vdc with 0.5V 1K sine wave on it. Ran the simulation and got 3.937Vdc…
Hi Chris,
Thanks for your reply.
What if we generate 5V and 3.3V through LT1117 from +12V as shown in DC2226A. We have to initially drop down the voltage through some high wattage resistor and then we can generate the same.
+12V - HWR - 8V - LT1117…
Hi Vishnu,
No pin compatible replacement for ADP3333.
For ADP3338, I found the fixed version of LT1117 as same pinouts but is only up to 800mA & has higher dropout voltage.
Performance wise, I recommend using ADP7102 & ADM7171 to replace ADP3333 and…
Hello respected,
Have a good day....
Please confirm pin 1 orientation on tape of package SOT223-3 and DFN-10 for below MPN.
MPN =
| LTC2854CDD#TRPBF = DFN-10 |
| LT1117CST#TRPBF = SOT223-3 |
Thank you...
Did you mean LT1117?? It's a quasi-LDO. Needs at least 0.7-0.8 across it. Did you measure your 3.3V?
Depending on total current required, you could look at ADP160.
Harry
Hello...
I am using the AD9958 to generate two signal at the same frequency. Channel 0 is modulated in PSK mode with a low frequency square wave applied on pin 42 (P2 used as CH0 two-level modulation input, Phase "180°" is written in its CW1 register…
| LTM8045 |
| LTM8049 |
| LTM4651 |
| LTM4661 |
| LTM4686 |
| LTM4676 |
| LTM4686-1 |
| LTM4676A |
| LTM4675 |
| LTM4677 |
| LTM4678 |
| LTM8062 |
| LTM8061 |
| LTM8052 |
| LTM8026 |
| LTM8056 |
| LTM8064 |
| LTM8054 |
| LTM8055 |
| LTM4600 |
| LTM4600HV |
| LTM4608A |
| LTM4604A |
| LTM8032 |
