Both HMC830 and HMC832 will meet these requirements but the application must utilize a tunable reference and manual tuning to meet the -60dBc spurious and hop time requirements. I've attached an appnote on manual tuning. With a fixed 50MHz reference Figure…
Hello,
I'm working with the PLL VCO HMC830.
I want to use a look-up table (LUT) for manual calibration, as decribe in "Frequency Hopping with Hittite PLLVCOs Application Note" (attached) (https : // www . hittite.com/content/documents/application_notes…
Use the ADP150 regulator; good performance, low cost.
Use…
This note discusses best practices for use of the Serial Port Interface (SPI) Mode selection feature of HMC PLL and PLLVCO product lines.
The attached FAQ document provides additional information on the use of the PLL+VCO and Clock Timing family of products. Specifically,
the applicable products are:
HMC820LP6CE HMC821LP6CE HMC822LP6CE HMC824LP6CE HMC826LP6CE
HMC828LP6CE HMC829LP6…