• RE: 能否推荐用于GSM信号ALC控制的检波芯片?

    您好,官网上有关检波芯片的相关数据手册和信息您可以先参考一下。

    HMC813-Die 数据手册和产品信息 | 亚德诺半导体 

  • What is the baseline of the HMC813 video output noise?

    What is the baseline of the HMC813 video output noise?

  • RE: AGC working at high frequency

    Have you looked at the SDLVA products?  They are much flatter over frequency than the traditional log amps.  Try looking at: HMC613, HMC813, HMC913 or HMC1013.

  • RE: HMC6981LS6 Die dimensions

    Hi Alessandro,

                            The information you are requesting is considered proprietary to Analog Devices and  can't be provided. Thermal analysis of the HMC6981LS6 has been done and we provide theta JC, the thermal resistance from the channel to the ground paddle…

  • RE: LTC2000 Operating Temperature vs Junction temperature

    The 70C is referring to the temperature of the die. Keep the die lower than 70C with a heatsink or use a higher temperature grade. 

  • HMC341 die

    Where can I get the S parameter of LNA HMC341 measured on die? The S papameter offered on website is the results measured on test board.

  • HMC392A-Die

    I wanted to Simulate the HMC392A in Microwave office. So i downloaded its S2P file from design resources and as i performed simulation its responses like return loss is better than the datasheet but its gain is decreased to max15.7 dB after simulation…

  • Die Temperature

    How can I determine the die temperature of your device?

  • ltc2641 die -

    The largest temp range the DAC will operate per the data sheet is -40 to +85 C. If I get the die will it operate at -55 to 125C? I will be mounting the die on ceramic substrate.

    does the assumption that it will work if properly heatsunk although the…

  • HMC598 Die

    Hello,

    Do you have a maximum power consumption for the HMC598 in die form? The data sheet shows 175 mA @ 5 volts, but it's only a typical number and I'm seeing  220 mA @ 5volts, with no input signal or output load. Thanks.

    Best Regards.