It will probably the same or very similar to the HMC611 temp sensor output (see below).
I will try to find the HMC602 temp sensor output plot.
Update: The HMC602 has the same slope and intercept as the HMC611 on its TEMP pin.
Using the HMC602 as a detector in a RX AGC loop. The HMC602 is detecting the Tx signal (possibly radiated) at higher levels that the RX (conducted) signal. The RX path and AGC circuit is on the bottom side of the board and Tx is on the top side. Has anyone…
Hi, I'm measuring the rise and fall time of the HMC602 with an input power changing between -60dBm and -20dBm and I'm getting values much biffer than the ones stated in the datasheet (In the order of 700us). Can you please provide me the way the rise…
The HMC602LP4, HMC611, and HMC611LP4 log detector parts have a built-in temperature sensor but the datasheets don't have any specs on them. What is the sensitivity of this sensor and what is the sensor's typical output at given temperature lik…
Can you provide some application note regarding the controller mode of the HMC602 (or equivalent log detector/controller) ? We recently acquired evaluation boards for the HMC602LP4E and HMC346AMS8GE in order to implement an analog ALC loop in an experiment…
What's the characteristics (coefficients, precision) of the VPTAT output of the ADRF6720 ?
I find some information about VPTAT but nothing really coherent :
ADRF6720 temperature breakdown
TMP01 tolerance calculation
HMC602 & HMC611 Temp…
I also tried your suggestion. But I observed same result. At attachment you can see result of measurements.
主要讨论天线到比特和比特到天线，信号链覆盖，即刚才提到的从真正的DC 0 Hz到110 GHz的频谱覆盖。 我会简要介绍其中涉及到的各类设备。