I am doing my thesis. For that purpose, I want to simulate HMC588 in ADIsimPLL but i am unable to find its IC. Plz help me this regard. It is also acceptable for me to simulate HMC588 in ADS but its very difficult to model it
Not sure what you mean by "the frequency always jumps...". When simulating a loop filter with known component values set the "specify" drop down to "Components". Now the tool calculates a loop BW and phase margin for the…
There are no sub-harmonics (1/2 or 1/4) on the following wideband VCO's:
simPLL for HMC704+HMC588 | EngineerZone
I will respond to you via email.
Please note that the HMC588 is being discontinued and is currently at a ‘Last Time Buy’ status in its life cycle. The performance is essentially the same as our octave bandwidth HMC6380 which uses the same package…
主要讨论天线到比特和比特到天线，信号链覆盖，即刚才提到的从真正的DC 0 Hz到110 GHz的频谱覆盖。 我会简要介绍其中涉及到的各类设备。
I would like to know the equivalent hours of HMC764LP6CE & HMC783LP6CE. I cnn't find the information in the attached Reliability Report. How can I calculate that value?
现象是加电以后配置寄存器值，然后发频点置数，频率为10GHz。此时，CP端输出电压为4.9V ，进入单电源模式下的AD8065的同相端，输出为8.7V，HMC588振荡在12.5GHz，后接功分并加二分频器正相输出，输出幅度为-2dBm,然后加了5dB衰减进入VCCIN端。但是此时CP端电压没有改变 ，VCO输出频率未改变，锁定指示为失锁态。
The HMC588 was the first wideband VCO designed and since then there are products that easily cover the frequency range with equivalent or better performance. The HMC6380 is an ideal replacement part since the package and pinout are identical providing…