• [HMC1105] pads 1,3,4,6 ground


    Hello, I have a question about ground pads 1,3,4,6 of Hittite HMC1105 frequency doubler.

    When I see the assembly diagram of the datasheet, 1,3,4,6 pads are not wire bonded to the ground.

    However, the pad descriptions of the datasheet say 1,3,4,6 pads…

  • HMC1081 and HMC1105 S parameters

    Hi, we are currently doing some system analysis with HMC1081 and HMC1105. I see many other chips having their S parameters provided. I wonder if you could send me the S parameters for HMC1081 and HMC1105?

    Thank you

  • S_parameters for HMC576LC3B, HMC-APH596, HMC1105

    Hi,

    Please share any complete s-parameter data for HMC576LC3B, HMC-APH596, HMC1105.

    Requirement: Inputs as s1p (both IRL and ORL) or s2p for simulation models and also to cross-check our measured results.

    Any suggestions/feedback also welcome.

    Thank…

  • RE: 36GHz RF oscillation signal source

    You need a PLL which drives a frequency doubler which drives an amplifier. Possible choices might be ADF4371 (PLL),  HMC1105 (frequency doubler) and HMC7229 (amplifier). These are not the only choices.

      PDF

  • RE: HMC1110, admv7710-mounting and bonding questions

    Hi, 

    Based on the type of questions posted here I highly recommend that you pick up a copy of "Material and Processes for Hybrid Microelectronics" by Richard Brown (or something similar). I would also recommend "practicing" first with die that operate…