• HMC1060 output - VR1 - 3.65V and 1.85V

    Hi!

    Please can you suggest res values for

    VR1 - 3.65V

    VR2 - 1.85V

    What would be the variation from ideal (equation) for a 1% res taking into account the internal res deviation?

    The data sheet suggests the designer be aware of derating caps.  Would 22uF…

  • HMC1060 Output voltages are less than expected

    We are using HMC1060 to power HMC830 IC. Below mentioned screenshot is the circuit diagram we implemented on the custom PCB. The issue we are facing is that the measured voltages at VR1,VR2,VR3 are 2.25V ,2.25V and 2.9V respectively and VR4 is 5.01V.…

  • RE: HMC1060 Efficiency

    Hi Marty,

    Therefore the maximum power loss would be at about 12mW, is that right?  Does that refer to all outputs together, no matter of the output voltage and current?

    Best regards,

    Niklas

  • HMC1060 enable pin not working

    Hi,

    The HMC1060 output remain ON, even when the enable input is pulled down.

    The enable is driven from a GPIO line of Processor, whose maximum output is 3V3. 

    So there is no chance of damaging the EN pin.

    Another IC in the same board is working correctly…

  • RE: HMC1060 Enable

    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,
    …

  • HMC1060-HMC832-5V

    Hi,

    Is there any major problem in performance running hmc832 evaluation board using 5V?

    Thank you for your time,

  • RE: HMC1060 isolation between output terminals

    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,
    …

  • RE: Design of HMC1060 for HMC830 power

    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,
    …

  • RE: How to manage unused output pins in HMC1060

    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,
    …

  • RE: Why is my Voltage Regulator circuit (HMC1060) producing weird voltages?

    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,
    …